ExoWrap Insulation System
The quick and easy way to insulate high temperature surfaces in vessel engine rooms.
- One-Step solution for Thermal Protection
- One product does it all
- No more bulky layers
- Rated to 1000° C
ExoWrap® is a revolutionary system made from biosoluble vitreous silicate fibre which is reinforced with an outer jacket of heat sealed aluminum foil. In tape or blanket format, ExoWrap® is applied in one step eliminating the need for bulky and time consuming layered insulation. ExoWrap® can be easily removed and reinstalled by using the ExoWrap® Silihesive' Tape and is rated for use to 1,000º C max. ExoWrap® can be used throughout the engine room.
ExoWrap® Tape
For use on bent and flanged pipes in areas where maintenance is not a consideration and/or space is limited. ExoWrap® has a pressure sensitive adhesive on the inner side for ease of installation.
Application instructions
Remove dirt, oil, scale and excessive moisture from surface. ExoWrap® is wound around the pipe in a spiral motion using a 50% overlap to ensure good adhesion. Be sure that the foil edges are securely fastened. Ends can be secured with wire or clips if desired. For removal, unwind or cut the ExoWrap® Tape from the pipe. Tape is not reusable.
ExoWrap® Blankets
For use on straight pipes, valves, exhaust equipment, turbochargers, angled and uneven surfaces. And, anywhere that insulation is required. ExoWrap® Blankets are secured with ExoWrap® 'Silihesive' Tape for ease of maintenance.
Application instructions
Cut the ExoWrap® Blankets to size with a utility knife or shears. Wrap around the surface to be insulated, butting the ends together forming a seam. Secure and seal the seam with Silihesive Tape. To remove ExoWrap® Blanket, cut the Silihesive Tape and unwrap from metal surface. To reinstall, new Silihesive Tape must be applied.
CLICK HERE FOR ADDITIONAL INFO>>>
| 
PRODUCT DIVISIONS
